Works Supervisor
Il y a 21 heures
Brussels, Brussels-Capital, Belgique
China State Construction Engineering (Hong Kong) Limited
Temps plein
Gratuit avec email ou Google
Enregistrez cette offre et organisez votre recherche
Créez un compte gratuit pour enregistrer des offres d'emploi, créer des alertes et revenir à cette liste depuis votre tableau de bord.
Gratuit avec email ou Google
En continuant, vous acceptez nos Conditions d’utilisation & Politique de confidentialité.
China State Construction Engineering (Hong Kong) Limited (“the Company” or “China State Hong Kong”) started its construction business in Hong Kong in 1979. The Company engages in building construction and civil engineering works. China State Hong Kong is among the largest construction contractors in Hong Kong, and is approved by the Works Bureau, to be on the List of Approved Contractors (Group C) for Public Works in the five major categories of building and civil engineering works, namely, “Buildings”, “Port Works”, “Roads and Drainage”, “Site Formation” and “Waterworks”.
Responsibilities
employed by the BSESP as a works supervisor (building services) in building services engineering inspection;
Certificate in Building Services or Electrical or Mechanical Engineering from a Hong Kong Polytechnic University, the HKIVE / technical institute / technical college or equivalent; or
at least five (5) years local experience as a skilled worker, or successfully completed a recognized technician apprenticeship in the field of Building Services Engineering, Electrical Engineering or Mechanical Engineering; and
having attained a level of proficiency requirements of Level 2 or above in English Language in HKDSE or the HKCEE, or equivalent; and Secondary 3 standard or above in Chinese Languages, or equivalent; together with three (3) years relevant post-qualification local experience of site supervision of building services installations.
Duties
Be responsible to the CM for the supervision of the construction works and carry out duties of a Building Services Inspection Team;
Monitor the standard of workmanship and ensure the quality of works conforming to the Client’s Requirements, the Specification and international standards (i.e. BSEN, IEC), Code of Practice as specified by the CM;
Inspect building services installations in accordance with Building Services Site Inspection Guide, site administration form and inspection form as stipulated in Appendix BS-14a and BS-14b to this Part D of the Client’s Requirements. Building Services Inspection Team shall also read the documents in conjunction with material submission, delivery and installation schedule; sample board list; list of holding point and witness point; Proposed Project Inspection Plan; documentations for site supervision; and list of other quality documents for quality control purpose stipulated in the Appendix BS-11, BS-14a to BS-18c to this Part D of the Client’s Requirements which set out as reference for performing site inspection duties;
Supervise Modular Integrated Construction (MiC), MiMEP and precast elements for the project when applicable. Detailed requirements for adoption of MiC, and MiMEP are listed in Appendix BS-01 to this Part D of the Client’s Requirements, and Appendix G23 to Part A of the Client’s Requirements; and
Review and endorse the Inspection, Test, and Approval Plans (ITAP) submitted from the Contractor and ensure the compliance of HD’s requirements.
Particular Duties for WS(BS)
During Construction
Identify and immediately report for any discrepancies in the contract documents such as drawings and specifications;
Comment and monitor the installation programme submitted by Specialist Sub-contractors with reference to the Contractor’s programme;
Comment and monitor the submission schedules (drawings, materials, samples etc.) submitted by the Specialist Sub-contractors;
Comment and monitor the Inspection, Test, and Approval Plans (ITAP), inspection schedules, T & C schedules, T & C procedures and T & C report formats submitted by the Contractor and the Specialist Sub-contractors;
Identify inspection activities in particular for covered up works, works put out of view and types of inspection work that must be completed before associated works by other parties (i.e. builder’s work) and establish inspection schedule for on-going monitoring;
Responsible for the upkeep of site records including site record books and submission of all monthly returns. All events should be properly RECORDED especially the agreed date for submission of outstanding information or the date of re-inspection;
Supervise building services installation works and monitor labour resources, progress, materials and equipment used on Site;
Maintain and update the filing systems as required by the CM;
Check the material and equipment compliance against Contract requirements and app roval / acceptance record upon delivery to Site, and maintain the site check records;
Inspect the installation works to ensure good workmanship, check with compliance with drawing acceptance record and installation requirements, and maintain the site inspection records. The frequency of checking by the Building Services Inspection Team on building services works is specified in Appendix BS-11 to this Part D of the Client’s Requirements;
Check and update the daily labour strength (including checking of qualified tradesme & intermediate tradesmen) and works activities on site, and report on any deficiencies immediately;
Check the requirements under the “Site Safety Handbook” and relevant statutory parties are complied with. The frequency of checking by the Building Services Inspection Team on site safety and environmental protection works is specified in Appendix BS-12 to this Part D of the Client’s Requirements;
Monitor and report immediately any unavailable technical approvals, including drawings before the inspections of works to be covered up;
Maintain and update the following records and summary in the format as required by the CM:
- Material and Plant checking; Works inspection for the daily and scheduled activities; Abortive works, and change to the Works information covered by CM’s Instructions; Test and system performance commissioning. Provide Site Progress Reports for Site Meetings and Specialist Sub-contractors coordination meetings; Take site photos on site progress of works, noticeable defective works and non-compliance of works; Witness and report the acceptance of all specified tests, and system performance commissioning of works, and maintain the site test records; Provide and update the list of outstanding and defective works from time to time; Monitor and report progress of defects rectification and completion of outstanding / additional works, including testing and commissioning works; Check the readiness of building services operation and maintenance manuals and as-fitted drawings submitted by various contractors; Attend mock up inspections (e.g. Timber mock up, Sample flat inspection, etc.) and factory inspections (e.g. LV switchboard acceptance tests, Open-up flush water pump test, Open-up to panel wall, etc.); Arrange and attend the final acceptance inspection with relevant parties, including inspections by FSD, statutory parties, UTILITIES services, users, clients’ departments, maintenance agents, EMD of the HD, etc; Carry out any inspection works, prepare any site records and reports and witness any testing and commissioning works as required by the CM; Return all of the above site records and files as required by the CM; Assist in site checking of anysite measurements of building services works for payments and claims submitted by the Contractor / Specialist Sub-contractors; Attend site audit checking and follow up on corrective action and non-conformity; Responsible for the supervision of the building services works; Monitor the standard of workmanship against the Client’s Requirements and conformity as specified by the CM; Coordinate with Specialist Sub-contractors on various T&C works; Witness the T&C of building services installations in accordance with the requirements of this Contract, and ensure all T&C to be conducted with satisfaction before all statutory inspection; and Witness the special tests in accordance with the requirements of this Contract, including but not limited to Bench Test for CABD equipment, as required by the CM.
- Material and Plant checking; Works inspection for the daily and scheduled activities; Abortive works, and change to the Works information covered by CM’s Instructions; Test and system performance commissioning. Provide Site Progress Reports for Site Meetings and Specialist Sub-contractors coordination meetings; Take site photos on site progress of works, noticeable defective works and non-compliance of works; Witness and report the acceptance of all specified tests, and system performance commissioning of works, and maintain the site test records; Provide and update the list of outstanding and defective works from time to time; Monitor and report progress of defects rectification and completion of outstanding / additional works, including testing and commissioning works; Check the readiness of building services operation and maintenance manuals and as-fitted drawings submitted by various contractors; Attend mock up inspections (e.g. Timber mock up, Sample flat inspection, etc.) and factory inspections (e.g. LV switchboard acceptance tests, Open-up flush water pump test, Open-up to panel wall, etc.); Arrange and attend the final acceptance inspection with relevant parties, including inspections by FSD, statutory parties, UTILITIES services, users, clients’ departments, maintenance agents, EMD of the HD, etc; Carry out any inspection works, prepare any site records and reports and witness any testing and commissioning works as required by the CM; Return all of the above site records and files as required by the CM; Assist in site checking of anysite measurements of building services works for payments and claims submitted by the Contractor / Specialist Sub-contractors; Attend site audit checking and follow up on corrective action and non-conformity; Responsible for the supervision of the building services works; Monitor the standard of workmanship against the Client’s Requirements and conformity as specified by the CM; Coordinate with Specialist Sub-contractors on various T&C works; Witness the T&C of building services installations in accordance with the requirements of this Contract, and ensure all T&C to be conducted with satisfaction before all statutory inspection; and Witness the special tests in accordance with the requirements of this Contract, including but not limited to Bench Test for CABD equipment, as required by the CM.