R&D Wafer-to-Wafer bonding Engineer
il y a 4 semaines
R&D Wafer-to-Wafer bonding Engineer
Research & development - Leuven | Just now
We are looking for an R&D bonding process engineer focused on Wafer-to-Wafer (W2W) bonding to strengthen the MAterial Transfer (MAT) team.
R&D Wafer-to-Wafer bonding Engineer
What you will do
Bonding processes with enhanced overlay accuracy and wafer distortion control will enable new integration options to fabricate future logic, memory, RF, photonic, imager, MEMS… devices. Bonding approaches used in layer transfer technologies allow the introduction of backside power delivery networks and even backside source contacts. Controlling and optimizing wafer distortion during bonding is essential for these applications, as overlay requirements are very tight for future technology nodes. Appropriate scanner corrections will mitigate wafer distortion partially, but bonding conditions also need to be adapted to avoid distortions over a short length scale which are difficult to correct during litho exposures. Furthermore, the bonding imprint needs to be very reproducible to enable batch corrections and increase throughput. All of these aspects will have to be assessed in detail.
As a member of the MAterial Transfer (MAT) team, you will be responsible for executing and optimizing W2W bonding processes. Furthermore, you will have to analyse metrology data obtained during bonding (. bond wave) in-depth. You will have to link these bond metrology data with post-bond overlay measurements and propose W2W bonding process adjustments to minimize short range wafer distortions mainly at the wafer centre and edge regions. As an R&D process engineer you will work closely together with other researchers to push newly developed processes to a higher maturity level and, in the end, transfer these processes to imec’s pilot line.
As an R&D W2W bonding Engineer you will have a significant number of responsibilities and will therefore be highly influential in helping to achieve the team’s goals and targets.
As an R&D Engineer:
You will be responsible for bonding process optimization of fusion and hybrid bonding processes. You will construct DoE’s and summarise results focused on W2W bonding optimization. You will report progress, results, and opportunities to various organizational levels both internally as well as to customers, suppliers and partners. You will be expected to take a significant hands-on role within the cleanroom. You will share the ownership of the bonding process with your direct colleagues, and you will have to improve the maturity level of the bonding process. You will report the process of the process improvements you’re responsible for to the involved team members and discuss the results over the team boundaries. Being a team player is essential for this type of work. You will have to make the link between the material transfer team and the engineering department making sure to safeguard the deliverables of both Fab and research departments.
What we do for you
We offer you the opportunity to join one of the world’s premier research centers in nanotechnology at its headquarters in Leuven, Belgium. With your talent, passion and expertise, you’ll become part of a team that makes the impossible possible. Together, we shape the technology that will determine the society of tomorrow.
We are and proud of our open, multicultural, and informal working environment with ample possibilities to take initiative and show responsibility. We commit to supporting and guiding you in this process; not only with words but also with tangible actions. Through y, 'our corporate university', we actively invest in your development to further your technical and personal growth.
We are aware that your valuable contribution makes imec a top player in its field. Your energy and commitment are therefore appreciated by means of a market appropriate salary with many fringe benefits.
Who you are
You have a Master’s or PhD degree in Physics, Chemistry, Industrial or Materials Science. You have a strong data analysis and/or simulation skills (. Matlab, C/C++, Python, Comsol…) You preferentially have a working knowledge and experience with bonding processes. In best case, you even have a basic understanding of other semiconductor manufacturing areas (., Lithography, Etch, CMP, . Experience with litho-corrections is considered as a big plus. You are highly motivated and self-driven and will initiate and assume ownership of problem solving and process improvement activities. You are innovative and creative in finding solutions to problems. You are comfortable working in a team environment, but at the same time you can also work autonomously with minimal supervision when required. You are passionate about application development, data interpretation and are focused on achieving high quality results. You are highly organized and have a logical and methodical working style. You are eager to work in a highly competitive field and a multicultural environment. To allow you to function in this setting, you must be fluent in both written and spoken English. Experience with overlay metrology is considered a plus.
Who we are
Accept marketing-cookies to view this content.
imec's cleanroom
Accept marketing-cookies to view this content.
Related jobs
Share this article on
-
R&D Wafer-to-Wafer bonding Engineer
il y a 1 semaine
Leuven, Flandre, Belgique imec Temps plein/R&D Wafer-to-Wafer bonding Engineer R&D Wafer-to-Wafer bonding Engineer Research & development - Leuven | Just now We are looking for an R&D bonding process engineer focused on Wafer-to-Wafer (W2W) bonding to strengthen the MAterial Transfer (MAT) team. R&D Wafer-to-Wafer bonding Engineer What you will do Bonding processes with enhanced overlay...
-
R&D Engineer Die to Wafer Bonding
il y a 2 semaines
Leuven, Belgique imec Temps plein/R&D Engineer Die to Wafer Bonding R&D Engineer Die to Wafer Bonding Engineering - Leuven | Just now You will be a member of the Bonding, Assembly and Wafer level packaging team (BAW) of the Materials, Transfer and Assembly group (MATA) which is responsible for developing processes requested by the process integration departments running imec’s CORE...
-
R&D Engineer Die to Wafer Bonding
il y a 1 semaine
Leuven, Flandre, Belgique imec Temps pleinR&D Engineer Die to Wafer BondingLocation: LeuvenResponsibilities:Define, organize and validate materials & processes during developmentLook for specific metrology solutionsContribute to research programs and joint development programsWork cross-functionally with teams and partnersReport about work internally and externallyStart fundamental research...
-
Die-to-Wafer Process Engineer
il y a 1 semaine
Leuven, Flandre, Belgique imec Temps plein/Die-to-Wafer Process Engineer Die-to-Wafer Process Engineer Engineering - Leuven | Just now We are looking for a Process Engineer focused on Die-to-Wafer (D2W) bonding to strengthen the MAterial Transfer (MAT) team. Die-to-Wafer Process Engineer What you will do Die-To-Wafer (D2W) bonding is being used in different advanced packaging and...
-
Team Leader Bonding Assembly and Wafer Level
il y a 1 semaine
Leuven, Flandre, Belgique IMEC Inc. Temps pleinTeam Leader Bonding Assembly and Wafer Level PackagingBusiness Operations - Leuven | Just now As a team leader, you will be responsible for the performance & personal growth of your team members but also contribute to the definition of the various project deliverables What you will doYou are a member of the Material Transfer and Assembly Group (MATA), which...
-
Team Leader Wafer Level Packaging Integration
il y a 3 semaines
Leuven, Belgique IMEC Inc. Temps pleinTeam Leader Wafer Level Packaging Integration- Management - Leuven | More than two weeks ago- Join the 3D team at imec’s R&D headquarters located in the heart of Europe and help in revolutionizing Advanced Packaging technology!- What you will do- Your mission as the team leader for the Wafer Level Packaging Integration team will be to coordinate a team of...
-
BEOL Integration R&D Engineer – Platform
il y a 1 semaine
Leuven, Flandre, Belgique imec Temps plein/BEOL Integration R&D Engineer – Platform & Operations Efficiency Team BEOL Integration R&D Engineer – Platform & Operations Efficiency Team Engineering - Leuven | Just now Join the Platform Efficiency Team at imec's R&D headquarters located in the heart of Europe and help strengthen technology and modules across imec's many programs. The Platform...
-
R&D Process Step Engineer Chemical Mechanical Polishing
il y a 1 semaine
Leuven, Flandre, Belgique imec Temps pleinR&D Process Step Engineer Chemical Mechanical PolishingLocation: LeuvenSupporting CMP R&D activities in Back-End of Line IC ProcessingChemical Mechanical Polishing (CMP) is crucial for the nanoelectronics industry, using chemical formulation with abrasive nanoparticles to polish wafers. The main goal is to enhance R&D activities in CMP for Back-End of Line...
-
R&D metrology Engineer
il y a 1 mois
Leuven, Belgique imec Temps plein/R&D metrology Engineer R&D metrology Engineer Engineering - Leuven | Just now As R&D metrology engineer for 3D IC integration, you will develop advanced metrology to address 3DIC scaling roadmap challenges. R&D metrology Engineer What you will do You will be part of the metrology and inspection (M&I) group within the Advanced Patterning...
-
R&D metrology Engineer
il y a 3 semaines
Leuven, Belgique imec Temps plein/R&D metrology Engineer R&D metrology Engineer Engineering - Leuven | Just now As R&D metrology engineer for 3D IC integration, you will develop advanced metrology to address 3DIC scaling roadmap challenges. R&D metrology Engineer What you will do You will be part of the metrology and inspection (M&I) group within the Advanced Patterning...
-
BEOL Integration R&D Engineer – Platform
il y a 1 semaine
Leuven, Flandre, Belgique imec Temps pleinBEOL Integration R&D Engineer – Platform & Operations Efficiency TeamJoin the Platform Efficiency Team at imec's R&D headquarters located in the heart of Europe and help strengthen technology and modules across imec's many programs. The Platform Efficiency Department is part of the Platform & Operations Efficiency Team and is responsible for the...
-
BEOL Integration R&D Engineer – Platform
il y a 4 semaines
Leuven, Belgique imec Temps plein/BEOL Integration R&D Engineer – Platform & Operations Efficiency Team BEOL Integration R&D Engineer – Platform & Operations Efficiency Team Engineering - Leuven | Just now Join the Platform Efficiency Team at imec's R&D headquarters located in the heart of Europe and help strengthen technology and modules across imec’s many programs. The...
-
BEOL Integration R&D Engineer – Platform
il y a 2 semaines
Leuven, Belgique imec Temps plein/BEOL Integration R&D Engineer – Platform & Operations Efficiency Team BEOL Integration R&D Engineer – Platform & Operations Efficiency Team Engineering - Leuven | Just now Join the Platform Efficiency Team at imec's R&D headquarters located in the heart of Europe and help strengthen technology and modules across imec’s many programs. The...
-
R&D Engineer I-Line Lithography
il y a 1 semaine
Leuven, Flandre, Belgique imec Temps plein/R&D Engineer I-Line Lithography R&D Engineer I-Line Lithography Engineering - Leuven | Just now Join the Scanner team of the Advanced Patterning department and become the expert that introduces I-Line lithography for scaling chips in the third dimension. R&D Engineer I-Line Lithography What you will do As microchip scaling continues, the...
-
R&D metrology Engineer
il y a 1 semaine
Leuven, Flandre, Belgique imec Temps pleinR&D Metrology EngineerEngineering - Leuven | Just nowAs a Metrology Engineer focused on R&D for 3D IC integration, you will work on developing advanced metrology solutions to tackle challenges in the 3DIC scaling roadmap.What You Will DoWork closely with the 3DIC/Advanced Wafer Level Packaging program and integration teamsIdentify metrology/inspection...
-
R&D Inspection Engineer for 3D IC integration
il y a 1 semaine
Leuven, Flandre, Belgique imec Temps pleinR&D Inspection Engineer for 3D IC integrationAs R&D Inspection Engineer for 3D IC integration, you will develop advanced metrology to address 3DIC scaling roadmap challenges.What you will doYou will be part of the metrology and inspection (M&I) group within the Advanced Patterning department. As R&D Inspection Engineer for 3D IC integration, you will: Work...
-
Process Specialist Bonding
il y a 1 semaine
Leuven, Flandre, Belgique IMEC Inc. Temps pleinProcess Specialist Bonding & Assembly- Engineering - Leuven | Just now- What you will doAs a process specialist you will be a member of the fab engineering team. This team is responsible for in-line processes and tools which are used in CMORE (Life science, MEMS, actuators, sensors...) and Core (3D, Logic, Memory...).You are responsible for providing process...
-
Process Specialist Bonding
il y a 3 semaines
Leuven, Belgique IMEC Inc. Temps pleinProcess Specialist Bonding & Assembly- Engineering - Leuven | Just now- What you will doAs a process specialist you will be a member of the fab engineering team. This team is responsible for in-line processes and tools which are used in CMORE (Life science, MEMS, actuators, sensors...) and Core (3D, Logic, Memory...). You are responsible for providing...
-
Test Engineer
il y a 1 semaine
Leuven, Flandre, Belgique IC Resources Temps pleinAn opportunity has become available for a Test Engineer in Leuven to join a growing photonics start up focusingon holographic chips.As a Test Engineer you will have a number of responsibilities that include;Create and execute automated test setupsAnalyse test results and process dataDesign test experimentsHolographic chip testingTo be considered for the Test...
-
Test Engineer
Il y a 2 mois
Leuven, Flandre, Belgique IC Resources Temps pleinAn opportunity has become available for a Test Engineer in Leuven to join a growing photonics start up focusingon holographic chips.As a Test Engineer you will have a number of responsibilities that include;Create and execute automated test setupsAnalyse test results and process dataDesign test experimentsHolographic chip testingTo be considered for the Test...
