Stage - Development of a Military grade BLDC speed controller

The goal of this thesis is to develop a prototype of a BLDC (Brushless DC motor) speed controller that complaints to electrical military environment. The student will do some research on existing open source solutions to define the work path.The electrical constrains on the device should be studied to be able to successfully pass military standard (EMC). A...

The objective of this project is to develop a prototype of a BLDC (Brushless DC motor) speed controller suitable for use in challenging military electrical environments.The assigned student will conduct thorough research on existing open source solutions to chart the project's course. It is essential to analyze the electrical constraints of the device to...

**THESIS **DESCRIPTION** The goal of this thesis is to develop a prototype of a BLDC (Brushless DC motor) speed controller that complaints to electrical military environment. - **i. Define the **needs** The student will do some research on existing open source solutions to define the work path. The design will probably be based on an open-source BLDC speed...

**1. THESIS **DESCRIPTION** The goal of this thesis is to develop a prototype of a backup system for the turret motion. The system is aim to be use when the main motion system of the turret is defective and unusable. The designed system should be simple so that it is simple to integer into a turret. The military standard should be successfully passed (Main...

The goal of this thesis is to develop a prototype of a backup system for the turret motion. The system is aim to be use when the main motion system of the turret is defective and unusable. The designed system should be simple so that it is simple to integer into a turret. The military standard should be successfully passed (Main issue being the EMC).The...

Job Description:Develop a prototype of a backup system for turret motion when the main system is defectiveDesign a simple system to integrate into a turretEnsure the system meets military standards with a focus on EMCInvestigate and propose backup possibilities with the teamCreate a control board for at least one movement freedomConduct tests to validate...

The goal of this thesis is to develop a prototype of a backup system for the turret motion. The system is aim to be use when the main motion system of the turret is defective and unusable. The designed system should be simple so that it is simple to integer into a turret. The military standard should be successfully passed (Main issue being the EMC).The...

The goal of this thesis is to develop a prototype of a backup system for the turret motion. The system is aim to be use when the main motion system of the turret is defective and unusable. The designed system should be simple so that it is simple to integer into a turret. The military standard should be successfully passed (Main issue being the EMC).The...

**Development of a portable and modular simulation and service tool for Large Caliber Gun systems** **1. **THESIS DESCRIPTION** The goal of this thesis is to develop a portable and modular simulation tool that allows to simulate a complete large caliber gun shot cycle in order to test, debug and service the turret control system without shooting real...

Development of a portable and modular simulation and service tool for Large Caliber Gun systems1. THESIS DESCRIPTION**The goal of this thesis is to develop a portable and modular simulation tool that allows to simulate acomplete large caliber gun shot cycle in order to test, debug and service the turret control systemwithout shooting real ammo.The system...

**THESIS DESCRIPTION** The goal of this thesis is to develop a custom compact, robust, fast sensor system for measuring gun recoil travel of large caliber gun. The system should be able to process the data caputered for analysis purpose, safety and preventive maintenance purpose. - i. **Define the needs** The student will start by understanding how our...

THESIS DESCRIPTIONThe goal of this thesis is to develop a custom compact, robust, fast sensor system for measuring gun recoil travel of large caliber gun. The system should be able to process the data caputered for analysis purpose, safety and preventive maintenance purpose.- i. Define the needsThe student will start by understanding how our systems are...

**THESIS DESCRIPTION** The goal of this thesis is to develop a proof-of-concept of a multiple CAN Bus bridge based on a Xilinx FPGA technology. The system should interface up to 8 CAN Bus, with configurable speed and configurable protocol through a single CAN line. The proof-of-concept shall be developed on a Xilinx development board. i. **Define the...

**Internship project at John Cockerill Defense**: The goal of this thesis is to develop a proof-of-concept of a multiple CAN Bus bridge based on a Xilinx FPGA technology (e.g. zynq ultrascale+). The system should interface up to 8 CAN Bus, with configurable speed and configurable protocol through a single CAN line. The proof-of-concept shall be developed on...

THESIS DESCRIPTIONThe goal of this thesis is to develop a proof-of-concept of a multiple CAN Bus bridge based on a Xilinx FPGA technology. The system should interface up to 8 CAN Bus, with configurable speed and configurable protocol through a single CAN line. The proof-of-concept shall be developed on a Xilinx development board.i. Define the needsThe...

Internship project at John Cockerill Defense: The goal of this thesis is to develop a proof-of-concept of a multiple CAN Bus bridge based on a Xilinx FPGA technology (e.g. zynq ultrascale+). The system should interface up to 8 CAN Bus, with configurable speed and configurable protocol through a single CAN line. The proof-of-concept shall be developed on a...

Internship opportunity at John Cockerill Defense:In this project, the main objective is to create a proof-of-concept for a multiple CAN Bus bridge utilizing Xilinx FPGA technology, such as zynq ultrascale+. The aim is to connect up to 8 CAN Bus interfaces, with adjustable speed and configurable protocol, through a single CAN line. The proof-of-concept will...

**Internship project at John Cockerill Defense**: The goal of this thesis is to develop a prototype of a suspension system for a tracked UGV. The system goal is to provide surface damping for an UGV. The study should be made for several size of UGVs. One size of UGV suspension system should be implemented during this thesis.The student will investigate the...

Internship project at John Cockerill Defense:The goal of this thesis is to develop a prototype of a suspension system for a tracked UGV. The system goal is to provide surface damping for an UGV. The study should be made for several size of UGVs. One size of UGV suspension system should be implemented during this thesis.The student will investigate the...

**Internship project at John Cockerill Defense**: The goal of this thesis is to develop a proof-of-concept of an IP which interfaces multiple UARTs through a single AXI4 lite register interface. The IP must be integrated into a Xilinx FPGA technology (e.g. zynq ultrascale+). The IP should interface up to 8 UART interface at the same time.The UART must have...